How could Romania save EUR 1.2 billion a year through smart metering
Category: Energie
29.01.2025

We are navigating through this difficult time for the national energy system, caused by an unfortunate combination of factors: heatwaves have generated an increase in consumption due mainly to the use of air conditioning, the wind speed was below average, and the draught kept water level at a minimum. This was of course a regional thing, which was trying for not only the Romanian system, but also the systems of our neighbours.

This led to the massive need for import, which greatly impacted prices on both the spot market, and the balancing market.  I feel that our context today is the right time for a warning on the importance of smart metering and the adoption of a proper energy strategy.

I am not dedicating this article to the major players in the energy industry, but rather to the many, and, in fact, the more important: consumers. I will try not to use technical details, since the purpose of this article is to address what is smart for us to do in the future, in order to prevent the unwanted effects of energy poverty. I also do not intend to try to persuade anyone of the importance of green energy in the fight against climate change, to avoid the polemic on their existence.

Since the most valuable examples are actual facts, I would like you to walk with me through the following scenario: Let’s assume a house has two power supply sources. The owners are connected to the public grid and have photovoltaic panels installed on the roof. Let’s assume, for the sake of the debate, that the household is inhabited by a nice family of 4, through whom multiple consumers are benefitting from this supply every day: the fridge, the air conditioning, the washing machines (dishwasher and laundry), lighting, TV set, etc. Let’s assume that, on generating energy, the panels have the capacity to cover the average consumption by all aforementioned consumers. 

Therefore, at the end of the month, the four pay for both consumption through the grid, and the panel-generated energy through the depreciation of the investment made in the latter, their objective being to optimise functionality and energy costs. Let’s also assume that grid power is more expensive in the evening (between 7 and 10 p.m.), and less costly in the rest of the day or at night, and panel investment depreciation is less costly than the grid energy, irrespective of the time of day we are talking about.

How could we then cut on energy costs? At first glance, it looks like a simple task: we install several own energy generation sources, and we thus cover the whole of our consumption. On thinking about it better though, we should install as many sources as necessary to cover the consumption peak during the 7 – 10 p.m. time interval. We are thus finding that it would be useless to install additional panels, since they do not work after sunset. Moreover, we need to consider the times of the year when the sun sets earlier and when the produced energy barely covers a third of the consumption average.

A second solution we could come up with would be to install storage systems, but they cost twice as much as the investment in photovoltaic panels; the unloading time at full capacity is only one hour, and the full unloading of batteries is not an efficient option. Another possibility would be to install a generator, but this would be an investment difficult to amortize for only a few-hour operation time, and the cost of generated energy could be higher than the grid energy price.

We could, then, limit ourselves to operating a mixture of grid and panel energy, when they are producing, or to installing a moderate storage capacity which would extend the use of panel excess energy to the maximum consumption times.

However, on a closer look, we can see that all examples above overlook a very important thing: consumer management and their optimisation. It is important to take into account that a multitude of consumers can function in adaptation to both the grid energy prices and to the panel operation and installed storage systems.

Installation of a management system (based on simple automation) might optimize consumption by scheduling the operation of washing machines during the day, when panel production is at its peak, or at night, when grid energy price is at its lowest, while air conditioning and heating could be scheduled to vary the aimed at temperature by +/- 2-3 degrees Celsius when efficiency so requires it, thus optimising battery charging and peak time electricity consumption.

We thus realise that a three-way approach – that of sources, of consumption and of storage, is the most efficient in the given scenario.

The same goes to the national power grid.

Today, there are those who promote the installation of sufficient power sources in order to eliminate the import of energy, while also stating that we would thus be entirely independent energy-wise. This option has the disadvantage of us, consumers, covering all amortisation costs thereof. At the same time, a neglect of investments in consumption management is a fact, and this is highlighted by a lack of efficient and automated metering, as well as by the advanced logic of the management of grids. We cannot speak of efficient communication in the sense of consumer education either.

Consumers in Romania neither directly benefit from hourly prices nor profit from the production excess times. They are thus not encouraged to install consumption management systems, be they household, commercial or industrial consumers. It might seem insignificant at first glance, but the impact can be remarkable. A household in Romania consumes an approximate average of 300 kWh monthly. On multiplying this consumption level with the 8 million consumers, we get to a total of 2,400 GWh per month, i.e., the equivalent of approximately RON 2.5 billion a month. A 20% saving would mean lowering costs by RON 500 million monthly, i.e., RON 1.2 billion per year. This is a 1.5 times larger amount than the cost of installing smart meters in all houses. Furthermore, if we consider the uniform distribution of the consumption peak throughout the day, we could avoid having to make billions of euro worth-of investments in new production capacities.

I am often criticised for advocating for smart metering, because the company I run operates in this field. I do understand public susceptibility, and this is why I have resorted to empirical data. Our purpose, though, goes beyond profit generation. Both I, and my 1,600 colleagues are dedicated to this activity thanks to our strong belief in its efficiency and the contribution it has to energy use sustainability, and numbers speak for themselves. I do hope the calculation scenario above has helped at least a little bit in raising awareness on the need to implement consumption management solutions.

I like to think that the next 25 years will be the years of a harmonious future, where resources are managed in a smart manner and where energy poverty is but an unknown concept to us all. However, in the absence of regulations and investments, as well as of a responsible conduct being adopted by consumers, this will unfortunately not be possible.

Financial Intelligence